Octal 14-Bit, 125Msps uModule ADCs Achieve High AC Performance with only 140mW per Channel
Octal 14-Bit, 125Msps uModule ADCs Achieve High AC Performance with only 140mW per Channel
  • Korea IT Times
  • 승인 2011.05.12 10:31
  • 댓글 0
이 기사를 공유합니다

Bit 125Msps Octal µModule® ADC with Small Footprint

Linear Technology Corporation announces a family of low power 14-bit, 80Msps, 105Msps and 125Msps octal µModule® ADCs that provide excellent AC performance and low power in a small form factor. The LTM9011-14 is an octal 14-bit, 125Msps ADC with 73.1dB signal to noise ratio (SNR) and 88dB spurious free dynamic range (SFDR) at baseband. Power dissipation is only 140mW per channel. The 80Msps LTM9009-14 and 105Msps LTM9010-14 consume 94mW per channel and 113mW per channel, respectively.

Operating from 1.8V analog and digital supplies, the LTM9011 family includes a sleep mode that reduces power dissipation to just 2mW. Whether operating at full speed or in sleep mode, this ADC significantly lowers the power budget for high speed multichannel designs such as multiple-input multiple-output (MIMO) WiMAX/LTE, remote radio heads (RRH), military anti-jamming devices, radar, medical imaging and ultrasound applications.

Data is output from the LTM9011 in serial LVDS format to minimize the number of data lines. At 125Msps, each channel outputs two bits at a time, using two lanes per ADC. At sample rates below 62Msps, a one bit per channel option is available. The LTM9011 offers serial data communication and eight simultaneous sampling ADCs in a low profile 140-pin
11.25mm x 9mm BGA uModule package. In addition, the device integrates bypass capacitance and provides a
flow-through pinout, reducing the required board area for routing data I/O lines and simplifying layout.

The LTM9011 includes an SPI-compatible interface that enables users to choose between a variety of data settings that reduce digital feedback and simplify design. Options include a data output randomizer that reduces digital feedback, seven programmable LVDS output current levels, internal 100Ohm LVDS output termination resistors, and digital output test patterns. These settings can be programmed via SPI or hard-wired for a reduced set of operating modes.

The LTM9011 is the first in a family of pin-compatible octal ADCs, offering 14-bit and 12-bit resolution from 25Msps to 125Msps. Pricing starts at $191.45 for the 14-bit 125 Msps devices.


댓글삭제
삭제한 댓글은 다시 복구할 수 없습니다.
그래도 삭제하시겠습니까?
댓글 0
댓글쓰기
계정을 선택하시면 로그인·계정인증을 통해
댓글을 남기실 수 있습니다.

  • #1206, 36-4 Yeouido-dong, Yeongdeungpo-gu, Seoul, Korea(Postal Code 07331)
  • 서울특별시 영등포구 여의도동 36-4 (국제금융로8길 34) / 오륜빌딩 1206호
  • URL: www.koreaittimes.com / m.koreaittimes.com. Editorial Div. 02-578-0434 / 010-2442-9446. Email: info@koreaittimes.com.
  • Publisher: Monica Younsoo Chung. Chief Editorial Writer: Kim Hyoung-joong. CEO: Lee Kap-soo. Editor: Jung Yeon-jin.
  • Juvenile Protection Manager: Yeon Choul-woong. IT Times Canada: Willow St. Vancouver BC, Canada / 070-7008-0005.
  • Copyright(C) Korea IT Times, Allrights reserved.
ND소프트